UM7222MA-MSOP10

Product Description

The UM7222MA/UM7222 is a dual port high-speed, low-power data switch optimized for USB 2.0 ** switching. The UM7222MA/UM7222 switch is configured in double-pole/double-throw DPDT. It handles bidirectional ** flow, achieving a 550 MHz -3dB bandwidth, and a port to port crosstalk and isolation at -50dB at 250MHz.

The UM7222MA/UM7222 operates from a single +2.7V to +5.5V supply, with current consumption less than 1 microampere.

The UM7222MA/UM7222 features wide bandwidth and low bit-to-bit skew allow it to pass high-speed differential ** with good ** integrity, offers little or no attenuation of the high-speed **s at the outputs. Its high channel-to-channel crosstalk rejection results in minimal noise interface. Its bandwidth is wide enough to pass high-speed USB 2.0 differential **s (480Mbps). The control logic threshold is guaranteed to be compatible with 1.8V logic.

The UM7222MA is available in Pb-free MSOP10 package, while the UM7222 is available in Pb-free QFN10 package (1.4mm×1.8mm×0.55mm). They are ideal for portable high speed mix ** switching application.

Features

- Ron is Typically 6.5Ω at VCC=3.0V

- Low Bit-to-Bit Skew: Typically 50ps

- OVT on D+ and D- up to 5.5V

- Power OFF Protection: When VCC=0V, D+ and D- can Tolerate up to 5.5V

- Low Crosstalk: -50dB (250MHz)

- Low Current Consumption: 1μA

- Near-Zero Propagation Delay: 250ps

- Channel On-Capacitance: 6.5pF (Typical)

- VCC Operating Range: +2.7V to +5.5V

- 550MHz Bandwidth (or Data Frequency)

- Lead (Pb)-Free MSOP10 and QFN10 Packages

- ESD Rating: ±4kV I/O to GND

Applications

- Differential Signal Data Routing

- USB2.0 Signal Routing

- Cell Phone, PDA, Digital Camera and Notebook

- LCD Monitor, TV and Set-Top Box